Hi all,
If you have specific function request for Arrim ONE, you can post it here. And we will get back to you as soon as we review it.
Regards,
Hi all,
If you have specific function request for Arrim ONE, you can post it here. And we will get back to you as soon as we review it.
Regards,
would there be an option to include area measurements?
for me it would be helpful to measure the size of small flowers in the field, size between 1 and 3 cm in width and length. The measurement should be included in a photo
Best regards
Is it possible to export the measurments to magicplan or other similar apps?
Could you add the function to create floor plans. I believe this would make the app the most accurate tool for plans
Can you use it just as a laser measure?
Might need to be voice activated as you wouldn't be able to see the touch screen with the phone pressed against a wall (unless you could use front camera somehow).
+1 for the floorplans, would be great if you could pirouette around the house and get an accurate set of dimensions as you go
Hi peter & gaci, we have it in our roadmap. If we can finish this function before Sept, we will have it in 1.0 software.
This one might be tricky...
The ability to insert a plane (or multiple planes) in the AR app and have it persist from room to room, potentially with x-ray.
Lets say I want to plan a staircase, it would be nice to do this:
1) Draw a horizontal line at the top or bottom of the staircase
2) Create a plane from that line at the appropriate angle.
3) wander around to see where it would come through any wall/ceiling.
4) add the walls/ceilings as planes
5) make adjustments to start/end point and be able to see the changes (maybe from a different room)
Hi Peter,
interesting application. I need to discuss it with our team, get back to you later.
And another one...
Able to locate a remote object of your choice (e.g. a separate laser, led, small picture of jean luc picard).
From your video on kickstarter, there is a picture hanging application. But you need at least two people of this, since the measurement would be displayed on the screen.
If there was a separate object that can be used a locator, you could place the phone on a tripod (or other support) and move the object around on the wall until you heard a beep, then you knew you were in the right spot.
The other alternative would be to be able to set up the laser to point at one point, then the next etc. And for the phone to indicate if it loses location. In fact if you provided the difference between the laser location and the desired spots, I could probably knock up a motorised tripod to move between the points pretty easily.
Hi Peter,
About generating a persist plane, it is technically easy to do. The problem is, if you move to another room, the lighting environment varies, and the plane may move slightly. Not sure, we will test it, and let you know the result.
Since there is the option of a floor plan, would be great if measurements could be exported to any cad format. I am also interested on the option you mentioned for implementing curves.
A function for the floor Plan would be great which divides the area in same length. For example I measure the floor and enter the width of my parquet and it tells and shows me how much rows I get and how I have to start. Full board or half or whatever the rest is
Are you going to publish Sdk to integrate the arrim with other apps. Especially to measures the size of trees and the girth (width) size of the bark.